1. Sensitive components A component that directly senses the measured (mass) and outputs other quantities that have a definite relationship to the measured. For example, the elastic body of the resistance strain type load cell changes the mass of the measured object into deformation; The elastic body of the capacitive load cell converts the measured mass into displacement. 2, conversion element Al...

The stability of force sensor is very important for all kinds of electronic testing machine and force measurement system which determines the stability of the whole product and system. At present, there is no unified evaluation standard and testing method for the stability of force sensors in the world. All the manufacturers of force sensors in the world admit that stability is an important qualit...

The range of the force sensor refers to the rated load of the sensor. The common unit is KG and N. If the measurement range is 100KG, the pressure sensor measurement range is 0-100kg. 1、Prevent overload The actual pressure must be within the range of the transducer. For example, if the actual pressure is 10KG, the selected range cannot be less than 10KG. The sensor determine the amount of pressure...

Torque sensors are used in a wide range of applications. Torque force is determined by two points: measuring torque sensor force and measuring speed. Torque sensors are not common in our daily life, but their application is very important. A reaction torque sensor in the car checks the torsion of the torsion bar and converts it into an electrical signal. This electrical signal is transmitted to th...

1、The material of the elastomer   The elastomer material of the force sensor is usually made of metal. Most of the available materials are aluminum alloy material, alloy steel material and stainless steel material. The alloy material not only has stiffness to ensure deformation consistency and deformation recovery, but also has good weather resistance and corrosion resistance. The main requir...

Force sensors can have problems if they are exposed to manufacturing conditions beyond the limits specified by the supplier during storage or assembly. 1. The temperature High ambient temperature is one of the common causes of many problems in pressure load cells. Because the pressure sensor has many components which can only work properly within a specified temperature range. Exposing in environm...

The separation of three concepts of activity, accuracy and resolution of force sensor: Usually, we often refer to the activity, accuracy and resolution of pressure sensor. However, many people are not very clear about the difference between these three parameters, leading to big and small problems in application. Below, we give a brief introduction to the differences between the activity, accuracy...

Torque sensors can be mounted horizontally or vertically. Power equipment, torque transducer, load equipment should be installed on a stable basis to avoid excessive vibration, otherwise there may be data instability, reduce the measurement accuracy, and even damage the sensor. We try to use elastic pin couplings or rigid couplings during installation. During installation, the concentricity of the...