Torque sensor is mainly used to measure all kinds of torque, speed and mechanical efficiency. It will change the torque into electrical signals. Its accuracy is related to the accuracy of the test system. Its main characteristic lies in that it can measure both static torque and rotational torque, namely dynamic torque. Let's have a brief understanding of the commonly used torque sensors. Non-cont...

The technology of torque sensor has become more and more mature. But in fact its development has gone through three stages. The first stage is the generation of measurement technology. In 1678, Robert Hooke described Hooke's law of proportionality between material elongation and associated material tension. Moreover, the advent of bridge circuits enables small changes in voltage to be measured. Th...

Torque sensors are used in a wide range of applications. Torque force is determined by two points: measuring torque sensor force and measuring speed. Torque sensors are not common in our daily life, but their application is very important. A reaction torque sensor in the car checks the torsion of the torsion bar and converts it into an electrical signal. This electrical signal is transmitted to th...

Torque sensors can be mounted horizontally or vertically. Power equipment, torque transducer, load equipment should be installed on a stable basis to avoid excessive vibration, otherwise there may be data instability, reduce the measurement accuracy, and even damage the sensor. We try to use elastic pin couplings or rigid couplings during installation. During installation, the concentricity of the...

Torque sensor industrial installation and general application installation points: industrial application torque sensor installed in the environment temperature is relatively high, and the relative humidity is better than 90%, no flammable, explosive environment. Industrial torque sensor installation of the magnetic field shield is also very important, the general torque sensor is not installed in...

In recent years, with the rapid development of the medical equipment market, pressure sensors are more widely used in the medical industry. The sensor has higher requirements, such as high precision, high reliability, stability, small volume and so on.  Let's summarize the application of pressure load cells in the medical industry: 1. Force sensor applied to infusion pump to ensure that the p...

Torque sensors are divided into static torque sensors (rotation cannot exceed 360 degrees) and dynamic torque sensors. Static torque can be measured in both static and dynamic torque sensors. Static torque sensor is selected for cost consideration. If you measure the torque when the equipment is working dynamically, you can only choose the dynamic torque sensor to measure. Hefei Natural Intel...

Torque sensor technology is becoming more and more mature, but its development has gone through three stages. The first stage is the generation of measurement technology. Hooke's Law was discovered by Robert Hooke in 1678. Hooke's law describes the proportional relationship between material elongation and related material tension. And, with the advent of bridge circuits, small changes in voltage c...